Showing 1–48 of 300 results

Aithhon Assault Transport

From 8,59$
  • The miniature comes in three separate pieces
  • Miniature length: 66 mm – 2.59 inch
  • Assembly of the parts requires adhesive
  • A standard Hex Base is included

The Aithon Assault Transport is a heavily armored infantry transport vehicle utilized in the BattleTech tabletop wargame universe. It was first introduced in 3084 by Clan Hell’s Horses and designed by Swedenborg Heavy Industries as a replacement for various outdated vehicles.

Despite its sluggish speed, the Aithon’s design emphasizes protection, boasting 12.5 tons of advanced Ferro-Lamellor armor technology. This armor system effectively reduces incoming damage and provides the vehicle with impressive durability on the battlefield. To further protect the vehicle’s vulnerable traction system, a 10-ton Armored Motive System is integrated into the Aithon’s design.

As an infantry transport vehicle, the Aithon can transport up to 25 troops, including battle-armored infantry, deep into enemy territory. In addition to its transport capabilities, the Aithon is armed with a forward-mounted Gauss Rifle, capable of delivering devastating kinetic damage to enemy units. The Gauss Rifle’s long-range capabilities also enable the Aithon to engage enemies at a distance.

Overall, the Aithon Assault Transport is a formidable vehicle on the battlefield, providing heavy armor protection and transportation for valuable infantry units. Its Gauss Rifle armament makes it a threat to enemy units from long range, while its armored motive system protects its traction and enhances its survivability.

Model designed by “Sir Mortimer Bombito”.
Loot Hoarder has obtained a license to sell physical prints of their sculptures
https://www.patreon.com/sirmortimerbombito

Alacorn

From 8,15$

The miniature comes in separate pieces
Lenght: 2,65 cm – 1,05 Inch
Width: 4,31 cm – 1,7 Inch
Height: 1,96 cm – 0,78 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Alpha Volk

9,68$

Alpha Volk – Battletech Miniature
-ton

  • Miniature height: 56.5 mm – 2.22 inch
  • A standard Hex Base is included

Alpha Wolf

9,24$

The miniature comes in separate pieces
Lenght: 4,32 cm – 1,71 Inch
Width: 3,76 cm – 1,49 Inch
Height: 5,54 cm – 2,19 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Amphion Turret 1

From 7,07$

The miniature comes in separate pieces
Lenght: 2,39 cm – 0,95 Inch
Width: 4,45 cm – 1,76 Inch
Height: 2,18 cm – 0,86 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Amphion Turret 2

From 7,07$

The miniature comes in separate pieces
Lenght: 2,39 cm – 0,95 Inch
Width: 4,45 cm – 1,76 Inch
Height: 2,18 cm – 0,86 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Apc Team

From 5,98$
  • The miniature comes in two separate pieces
  • Miniature length: 22,5 mm – 0.88 inch
  • Assembly of the parts requires adhesive
  • A standard Hex Base is included

Ares Ars-1 A

21,64$

The miniature comes in separate pieces
Lenght: 6,97 cm – 2,75 Inch
Width: 6,62 cm – 2,61 Inch
Height: 7,02 cm – 2,77 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Ares Ars-1 B

21,64$

The miniature comes in separate pieces
Lenght: 6,97 cm – 2,75 Inch
Width: 6,63 cm – 2,62 Inch
Height: 7,04 cm – 2,78 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Ares Ars-1 H

21,64$

The miniature comes in separate pieces
Lenght: 6,97 cm – 2,75 Inch
Width: 6,61 cm – 2,61 Inch
Height: 6,49 cm – 2,56 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Ares Ars-1 V

21,64$

The miniature comes in separate pieces
Lenght: 6,97 cm – 2,75 Inch
Width: 6,62 cm – 2,61 Inch
Height: 6,49 cm – 2,56 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Ares Ars-1 Z

21,64$

The miniature comes in separate pieces
Lenght: 6,97 cm – 2,75 Inch
Width: 6,61 cm – 2,61 Inch
Height: 6,49 cm – 2,56 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Areso medium tank

From 6,41$
  • The miniature comes in three separate pieces
  • Miniature length: 30,50 mm – 1.20 inch
  • The turret can rotate
  • Assembly of the parts requires adhesive
  • A standard Hex Base is included

the Ares medium tank is a formidable combat vehicle produced by the Terran Hegemony during the Star League era. Named after the Greek god of war, the Ares is designed for frontline combat and is known for its speed, maneuverability, and firepower.

The Ares tank is equipped with a variety of weapons, including a turret-mounted Particle Projection Cannon (PPC) for long-range engagements, a pair of Medium Lasers for close-range combat, and a machine gun for anti-infantry operations. Its armor is relatively light, but it compensates for this with its mobility, allowing it to dodge incoming fire and outflank enemy units.

Overall, the Ares medium tank is a versatile and reliable combat vehicle that has proven its worth in countless battles throughout the BattleTech universe. Its combination of speed, firepower, and maneuverability make it a force to be reckoned with on the battlefield, and it remains a popular choice among military commanders to this day.

Model designed by “Sir Mortimer Bombito”.
Loot Hoarder has obtained a license to sell physical prints of their sculptures
https://www.patreon.com/sirmortimerbombito

Artillery Cannon

14,02$

The miniature comes in separate pieces
Lenght: 4,2 cm – 1,66 Inch
Width: 6,56 cm – 2,59 Inch
Height: 6,07 cm – 2,39 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Axe Bear

9,68$

The miniature comes in separate pieces
Lenght: 5,43 cm – 2,14 Inch
Width: 5,29 cm – 2,09 Inch
Height: 4,63 cm – 1,83 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Axl 2c

From 8,15$
  • The miniature comes in five separate pieces
  • Miniature length: 44 mm – 1.73 inch
  • Assembly of the parts requires adhesive
  • The turret includes cutouts specifically designed to fit magnets with a diameter of 3mm and a height of 2mm
  • The turret can rotate
  • A standard Hex Base is included

Badger

From 5,98$

The miniature comes in separate pieces
Lenght: 1,88 cm – 0,75 Inch
Width: 3,3 cm – 1,3 Inch
Height: 1,45 cm – 0,58 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Bandit Hover Tank

From 7,50$
  • The miniature comes in three separate pieces
  • Miniature length: 42 mm – 1,65 inch
  • The turret includes cutouts specifically designed to fit magnets with a diameter of 3mm and a height of 2mm
  • The turret can rotate
  • Assembly of the parts requires adhesive
  • A hover Hex Base is included
The Bandit hover tank is a formidable 50-ton combat vehicle that has played a significant role in the Inner Sphere conflicts. Originally designed by the Clan, this highly adaptable OmniVehicle was brought to the Inner Sphere by Wolf’s Dragoons. Equipped with three Blackwell Opal medium lasers in its turret, two front-mounted Blackwell Pilum SRM-2 launchers, and a machine gun, the Bandit is a versatile vehicle that can provide both short and long-range fire support. Its carrying capacity of up to eight tons of infantry space also makes it an ideal vehicle for transporting troops into battle. The Bandit was primarily used by the Wolf’s Dragoons, who took great care to conceal its true nature and often reconfigured the tanks to confuse enemy attempts to estimate the actual quantity of their forces. Its impressive capabilities and rich history make it an essential part of BattleTech lore.

Model designed by “Sir Mortimer Bombito”.
Loot Hoarder has obtained a license to sell physical prints of their sculptures
https://www.patreon.com/sirmortimerbombito

Base Turret 2 LL

From 4,24$

The miniature comes in separate pieces
Lenght: 3,7 cm – 1,46 Inch
Width: 3,2 cm – 1,26 Inch
Height: 1,54 cm – 0,61 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Base Turret 4 Ac5

From 4,24$

The miniature comes in separate pieces
Lenght: 3,7 cm – 1,46 Inch
Width: 3,2 cm – 1,26 Inch
Height: 1,54 cm – 0,61 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Base Turret Artillery

From 4,24$

The miniature comes in separate pieces
Lenght: 3,7 cm – 1,46 Inch
Width: 4,12 cm – 1,63 Inch
Height: 1,67 cm – 0,66 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Base Turret Destroyed

From 4,24$

The miniature comes in separate pieces
Lenght: 3,7 cm – 1,46 Inch
Width: 3,2 cm – 1,26 Inch
Height: 1,48 cm – 0,59 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Behemothik Super Heavy Tank

From 9,24$
  • The miniature comes in seven separate pieces
  • Miniature length: 50 mm – 1.96 inch
  • Assembly of the parts requires adhesive
  • The turret includes cutouts specifically designed to fit magnets with a diameter of 3mm and a height of 2mm
  • The turret can rotate
  • A standard Hex Base is included

Blood Freestanding

8,59$

The miniature comes in separate pieces
Lenght: 4,01 cm – 1,58 Inch
Width: 2,83 cm – 1,12 Inch
Height: 5,39 cm – 2,13 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Blood Kite

9,68$

BloodK – Battletech Miniature

  • Miniature height: 48 mm – 1.88 inch
  • The miniature comes in four separate pieces
  • Assembly of the parts requires adhesive
  • A Hex Base is included

Blood Reaper

7,07$

The miniature comes in separate pieces
Lenght: 3,76 cm – 1,49 Inch
Width: 2,55 cm – 1,01 Inch
Height: 3,91 cm – 1,54 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Blood Reaper

7,07$

The miniature comes in separate pieces
Lenght: 3,76 cm – 1,49 Inch
Width: 3,18 cm – 1,26 Inch
Height: 3,94 cm – 1,56 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Blood Walking

8,59$

The miniature comes in separate pieces
Lenght: 4,01 cm – 1,58 Inch
Width: 3,93 cm – 1,55 Inch
Height: 5,11 cm – 2,02 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Brunelli

From 8,59$

The miniature comes in separate pieces
Lenght: 2,89 cm – 1,14 Inch
Width: 6,64 cm – 2,62 Inch
Height: 2,96 cm – 1,17 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Brunelli Weaponized

From 9,68$

The miniature comes in separate pieces
Lenght: 2,89 cm – 1,14 Inch
Width: 6,24 cm – 2,46 Inch
Height: 3,33 cm – 1,32 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Brutus

From 7,50$
  • The miniature comes in two separate pieces
  • Miniature length: 42 mm – 1.65 inch
  • Assembly of the parts requires adhesive
  • The turret includes cutouts specifically designed to fit magnets with a diameter of 3mm and a height of 2mm
  • The turret can rotate
  • A standard Hex Base is included

The Shchuka tank is a heavy tank used by the Clans in the Battletech universe. Its name means “pike” in Russian, and it is a fitting name for a vehicle that is designed for front-line combat and spearheading assaults.

The Shchuka is heavily armored, with its hull and turret covered in advanced Ferro-Fibrous and Reactive armor that can withstand significant amounts of damage. Its main armament is a turret-mounted Gauss Rifle, which fires hypervelocity slugs that can punch through even the toughest armor. The tank also has a secondary weapon system in the form of four forward-firing machine guns that can mow down infantry and light vehicles.

One of the key features of the Shchuka is its ability to transform into a more stable firing platform, allowing it to fire its Gauss Rifle with greater accuracy and precision. This transformation also improves the tank’s stability and reduces the recoil of its powerful weapon.

Despite its heavy armor and firepower, the Shchuka is not as maneuverable as some other tanks in the Battletech universe. Its top speed is relatively slow, and its size and weight make it vulnerable to certain types of terrain and obstacles.

Overall, the Shchuka is a heavily-armed and armored tank that is well-suited for front-line combat and spearheading assaults. Its Gauss Rifle is a devastating weapon that can punch through even the toughest armor, making the Shchuka a formidable opponent on the battlefield.

Model designed by “Sir Mortimer Bombito”.
Loot Hoarder has obtained a license to sell physical prints of their sculptures
https://www.patreon.com/sirmortimerbombito

Bulldog

From 7,50$
  • The miniature comes in six separate pieces
  • Miniature length: 39,50 mm – 1.55 inch
  • The turret includes cutouts specifically designed to fit magnets with a diameter of 3mm and a height of 2mm
  • The turret can rotate
  • Assembly of the parts requires adhesive
  • A standard Hex Base is included

The Mirmidon is a medium tank in the BattleTech universe, known for its versatility and adaptability on the battlefield. Developed by the Free Worlds League, the Mirmidon is a rugged and reliable vehicle that has proven to be effective in a variety of combat situations.

The Mirmidon is designed to be a multipurpose vehicle, capable of engaging both ground and air targets with equal effectiveness. Its primary armament is a turret-mounted autocannon, which provides it with a potent anti-armor capability. The autocannon is also effective against infantry and light vehicles, making the Mirmidon a versatile combat vehicle.

In addition to its autocannon, the Mirmidon is equipped with a coaxial machine gun and a missile launcher. The machine gun is useful for engaging infantry and light vehicles, while the missile launcher provides the Mirmidon with a long-range, indirect fire capability. The missile launcher is capable of firing a variety of missile types, including anti-armor, anti-aircraft, and smoke.

The Mirmidon’s armor is relatively thick for a medium tank, which makes it capable of withstanding significant punishment on the battlefield. However, its top speed is relatively slow compared to other medium tanks, which means that it is vulnerable to flanking attacks.

Overall, the Mirmidon is a solid medium tank that can be relied upon to perform well in a variety of combat situations. Its versatility and adaptability make it a valuable asset on the battlefield, and it is a popular choice among many military commanders in the BattleTech universe.

Model designed by “Sir Mortimer Bombito”.
Loot Hoarder has obtained a license to sell physical prints of their sculptures
https://www.patreon.com/sirmortimerbombito

Cata F

8,59$

CataF – Battletech Miniature

  • Miniature height: 45 mm – 1.77 inch
  • A Hex Base is included

Cata F

8,59$

CataF – Battletech Miniature

  • Miniature height: 45 mm – 1.77 inch
  • A Hex Base is included

Cesar

From 5,98$

The miniature comes in separate pieces
Lenght: 4,31 cm – 1,7 Inch
Width: 3,22 cm – 1,27 Inch
Height: 4,1 cm – 1,62 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Challenge Mbt

From 8,59$

The miniature comes in separate pieces
Lenght: 3,05 cm – 1,21 Inch
Width: 4,61 cm – 1,82 Inch
Height: 2,12 cm – 0,84 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Commando Com-1B

5,98$

The miniature comes in separate pieces
Lenght: 2,66 cm – 1,05 Inch
Width: 2,12 cm – 0,84 Inch
Height: 3,42 cm – 1,35 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Commando Com-1B

5,98$

The miniature comes in separate pieces
Lenght: 2,66 cm – 1,05 Inch
Width: 2,37 cm – 0,94 Inch
Height: 3,41 cm – 1,35 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Commando Com-1B

5,98$

The miniature comes in separate pieces
Lenght: 2,66 cm – 1,05 Inch
Width: 2,73 cm – 1,08 Inch
Height: 3,45 cm – 1,36 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Commando Com-1D

5,98$

The miniature comes in separate pieces
Lenght: 2,47 cm – 0,98 Inch
Width: 2,24 cm – 0,89 Inch
Height: 3,41 cm – 1,35 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Commando Com-1D

5,98$

The miniature comes in separate pieces
Lenght: 2,47 cm – 0,98 Inch
Width: 2,49 cm – 0,99 Inch
Height: 3,4 cm – 1,34 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Commando Com-1D

5,98$

The miniature comes in separate pieces
Lenght: 2,47 cm – 0,98 Inch
Width: 2,86 cm – 1,13 Inch
Height: 3,44 cm – 1,36 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Commando Com-2D

5,98$

The miniature comes in separate pieces
Lenght: 2,62 cm – 1,04 Inch
Width: 1,54 cm – 0,61 Inch
Height: 3,46 cm – 1,37 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Commando Com-2D

5,98$

The miniature comes in separate pieces
Lenght: 2,62 cm – 1,04 Inch
Width: 1,71 cm – 0,68 Inch
Height: 3,38 cm – 1,34 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Commando Com-2D

5,98$

The miniature comes in separate pieces
Lenght: 2,62 cm – 1,04 Inch
Width: 2,09 cm – 0,83 Inch
Height: 3,42 cm – 1,35 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Condor Hover Tank

From 7,50$
  • The miniature comes in three separate pieces
  • Miniature length: 42 mm – 1,65 inch
  • The turret includes cutouts specifically designed to fit magnets with a diameter of 3mm and a height of 2mm
  • The turret can rotate
  • Assembly of the parts requires adhesive
  • A hover Hex Base is included

The Condor is a heavy cavalry unit designed for swift response to rapidly changing battle conditions, and is one of the few heavy hover tanks available. Despite its high cost of purchase and maintenance, this formidable hovercraft boasts impressive speed capabilities, with a flank speed of 129 km/h and a cruising speed of 86 km/h, making it one of the fastest vehicles in its weight class and able to keep pace with even the swiftest ‘Mechs and vehicles. The tank’s armor, consisting of six tons of StarSlab/9.5 Mk II, provides significant protection for its role, though its bulk is concentrated on the front and turret, leaving the sides relatively vulnerable.

First introduced just prior to the formation of the original Star League, the Condor quickly became one of Red Devil Industries’ most popular products and remained so for centuries. It was widely utilized across the Inner Sphere, with the militaries of the Lyran Commonwealth, Federated Suns, and Capellan Confederation fielding the majority of the tanks during the Succession Wars. However, the capture of Red Devil’s factories by Clan Jade Falcon in 3064 resulted in the loss of the design until it was secured by Quikscell Company. They developed an advanced new-tech version of the classic design, which proved to be highly popular and even sold in kit form to meet demand.

The Condor’s weaponry is tailored to its role as a medium-range attack vehicle capable of engaging enemies on the move. Its turret is equipped with a GM Whirlwind Class 5 autocannon and a pair of Defiance B3M medium lasers, with Red Devil Industries actually building their own under license. Initially, Defiance Industries refused to allow Red Devil to build their own, leading to Red Devil offering a bounty for used or slightly damaged lasers to recondition and install on new Condors. However, when Defiance Industries noticed that their flagship BattleMech designs were being targeted by foes looking to collect the bounty, they relented. Additionally, the SureFire MiniGun, mounted on the body, serves as an anti-personnel weapon.

Model designed by “Sir Mortimer Bombito”.
Loot Hoarder has obtained a license to sell physical prints of their sculptures
https://www.patreon.com/sirmortimerbombito

Demolish Easy

From 5,98$

The miniature comes in separate pieces
Lenght: 2,33 cm – 0,92 Inch
Width: 3,45 cm – 1,36 Inch
Height: 1,4 cm – 0,56 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included

Demolish Easy

From 5,98$

The miniature comes in separate pieces
Lenght: 2,33 cm – 0,92 Inch
Width: 3,45 cm – 1,36 Inch
Height: 1,43 cm – 0,57 Inch
Assembly of the parts requires adhesive
A standard Hex Base is included